Material
40-45% polyester, 40-45% pulp-cellulose
Gauge
10 mil (557kg/m): Base 6 mil, liner 4 mil
Printer/Ink Compatibility
Canon, Epson, Encad, Hewlett-Packard, Mutoh, Mimaki, and Roland with pigment-based inks.
Software Setting
Optimized printer settings will vary from printer manufacturers. A fine art paper or matte paper setting is an appropriate starting point. However, we recommend that you try different settings to achieve optimum performance for your specific application.
Color Matching
For the best and most consistent results, a profile should be created using an external color calibrator in conjunction with your RIP and color matching software.
Light Fastness
The fading time of inkjet ink is a direct result of the inks you choose and the environment where the print is displayed. Contact the ink manufacturer to determine suitability for a particular application.
Finishing/Post Processing
Use a carbide knife for kiss and die cutting. For additional protection, liquid or spray coatings are recommended. Recommended outdoors for up to six months without additional protection.
Optimal Service Environment
For printing: 59-77° F, 20-80% Relative Humidity
For end use: 0 to 176° F
Handling Recommendations
Due to the absorptive nature of the coating, you should avoid touching the coated surface of the film. To install the graphic, peel 4 inches of the liner off the graphic and place on wall. Continue to peel back 4 inches of the liner incrementally while mounting.
Ideal Storage Conditions
50-80° F, 35-65% R.H. A controlled environment is recommended. Store in original packaging.
Shelf Life
Greater than 1 year from the BMG ship date when stored in proper conditions.