| TY-300 DTF Printer Specs | |
| Printing Method | Piezo ink-jet method |
| Dimensions | 80 in × 29.5 in. × 55.8 in. (2,032 mm × 748 mm × 1,415 mm) |
| Weight | 300 lb. (136 kg) |
| Media | Width: 7.2 in. to 30 in. (182 mm to 762 mm) Thickness: Max. 39.3 mil (1.0 mm) with liner for printing, Max. 15.7 mil (0.4 mm) with liner and 8.6 mil (0.22 mm) without liner for cutting Roll outer diameter: Max. 9.84 in. (250 mm) Roll weight: Max. 66.1 lb. (30 kg) Core diameter: 3 in. (76.2 mm) or 2 in. (50.8 mm) |
| Maximum Printing Width/Length | Max. 8.2 in. × 5.8 in. (210 mm × 148 mm) |
| Ink | Type: S-PG2 INK 500 ml cartridge Colors: Five colors (cyan, magenta, yellow, black, and white x 4 cartridges) |
| Printing Width | Max. 28.9 in. (736 mm) |
| Resolution | Max. 1,200 dpi |
| Cutting Speed | 0.39 to 11.8 in/s (10 to 300 mm/s) |
| Blade force (*2) | 30 to 500 gf |
| Blade type | CAMM-1 series blade |
| Blade offset | 0.0 to 59 mil (0.000 to 1.500 mm) |
| Software resolution (cutting) | 0.98 mil/step (0.025 mm/step) |
| Media heating system (*3) | Print heater set temperature: 86 to 100°F (30 to 38°C), Dryer set temperature: 86 to 112°F (30 to 45°C) |
| Connectivity | Ethernet (100BASE-TX/1000BASE-T, automatic switching) |
| Power-saving Function | Automatic Sleep Feature |
| Rated Input | 100-120 / 220-240 Vac 50/60 Hz 6.4/3.0 A |
| Power Consumption | During operation: Approx. 840 W Sleep mode: Approx. 70 W |
| Acoustic Noise Level | During operation: 63 dB (A) or less During standby: 58 dB (A) or less |
| Environment | During operation: 68 to 82.4°F (20 to 28°C), Humidity: 40 to 60% RH (no condensation) Not operating: 41 to 104°F (5 to 40 °C), Humidity: 20 to 80 % RH (no condensation) |
| Included Items | Dedicated stand, Power cord, Media holders, Separating knife, Replacement blade, Cleaning liquid, Drain bottle, User’s Manual, Software (VersaWorks, Roland DG Connect), etc. |
*1 The length of printing or cutting is subject to the limitations of the program.
*2 500 gf is the maximum instantaneous blade force. The blade force must be adjusted according to details such as the media thickness.
*3 Warm-up is required after power up. This may require 5 to 20 minutes, depending on the operating environment. Depending on the ambient temperature and media width, the preset temperature may fail to be reached.
*4 Operating environment (Use in an operating environment within this range.)
DTF Station Miro 36 Specs