Ink Compatibility | HP Bright Office Inks, HP Vivid Photo Inks, HP PageWide and HP Latex Inks |
Material | Polyester Fabric |
Weight (with liner) | 289 g/m² per ISO 536 Test Method |
Thickness (with liner) | 304 microns/12 mil per ISO 20534 Test Method |
Liner | 120 g/m², double-sided PE-coated silicone paper |
Adhesive | Clear, removable, and repositionable adhesive |
Removability | Up to 3 years removable/repositionable indoors |
Opacity | >85% per TAPPI T-425 Test Method and ISO 2471 Test Method |
Brightness | >87 per TAPPI T-452 Test Method |
Whiteness | 118 per ASTM E313-98 Test Method |
Finish | Matte |
Slip Rating | Certified according to ANSI A137.1/A326.3 and AS HB198:2014 (AS/NZS 4586) |
Operating Temperature | 15 to 25° C / 59 to 77° F |
Operating Humidity | 20 to 80% RH |
Water Resistance | Moderately water-resistant |
Wind Orientation | Print side out |
Core Size | 3-in core with a removable 2-in core adapter |
Dry Time | Immediate |
Flame Resistance | Class A, ASTM E84 approved fire certifications |
Lamination | For additional protection, liquid or spray coatings are recommended |
PageWide Cutter | The weight of this material is higher than the recommended weight limit for the HP PageWide XL cutter, which may reduce the expected life of the cutter |
Shelf Life | 1 year, unopened in original packaging |
Storage Temperature | 10 to 27° C / 50 to 80° F |
Storage Humidity | 35 to 65% RH |
Environmental | REACH Compliant |
Finishing/post processing | Use a carbide knife for kiss and die cutting |
Installation Tip | To install the graphic, peel 101 millimeters (4 inches) of the release liner off the graphic and place on wall or surface. Continue to peel back 101 millimeters (4 inches) of the liner incrementally while mounting. |
Country of Origin | Product of China |
Ordering Information | 8SU04A 610 mm x 30,5 m (24 in x 100 ft) 8SU05A 914 mm x 30,5 m (36 in x 100 ft) 8SU06A 1067 mm x 30,5 m (42 in x 100 ft) 8SU08A 1372 mm x 30,5 m (54 in x 100 ft) 8SU09A 1524 mm x 30,5 m (60 in x 100 ft) |
1. Recommended on indoor smooth, non-porous, sealed flat and dry surfaces for up 3 months. Slip resistance for dry environments based on testing by Sotter Engineering Corporation, June 2020, according to ANSI A137.1/A326.3 and AS HB198:2014 (AS/NZS 4586).
2. See HP REACH Declaration published at HP Printing Products and Consumable Supplies.
3. Class A, ASTM E84 approved fire certifications.
4. Performance varies based on printer and print profile. Water resistance testing by HP Image Permanence Lab on a range of HP media and follows ISO 18935 method. For more information, see HPLFMedia.com/hp/print permanence.