Ink Compatibility Compatible with Original HP Latex Inks; also solvent, low-solvent, and UV-curable inks.
Thickness (base vinyl) 76 microns/3 mil per ISO 20534 Test Method
Base Vinyl Calendered high-performance polymeric vinyl with UV inhibitors
Liner 140 g/m², double-sided PE-coated silicone paper
Adhesive Clear, permanent pressure-sensitive adhesive
Finish Matte, <10 gloss units at 60˚ reflection
Display Permanence (Commercial in-window) Over 6 years unlaminated with HP 886 and 882 Latex Inks printed on the HP Latex R2000 Printer series
Indoor Floor Durability Recommended on indoor smooth, non-porous, sealed flat and dry surfaces for up to 3 months
Slip Rating Certified according to ANSI A137.1/A326.3 and AS HB198:2014 (AS/NZS 4586)
Minimum Application Temperature 4 to 35˚C (39 to 95˚F) on clean, dry surfaces
Service Temperature -40 to 65˚C (-40 to 149˚F)
Operating Temperature 15 to 35° C / 59 to 95° F
Operating Humidity 40 to 60% RH
Lamination Cold lamination
Shelf Life 2 years, unopened in original packaging
Storage Temperature 21 to 23° C / 69 to 75° F
Storage Humidity 50% RH
Flame Resistance B1 approved fire certification
Environmental REACH compliant
Country of Origin Product of the United States
Ordering Information 1TH72A 1372 mm x 45,7 m (54 in x 150 ft)
1TH73A 1524 mm x 45,7 m (60 in x 150 ft)
6GA69A 1372 mm x 50 m (54 in x 164 ft)
6GA71A 1524 mm x 50 m (60 in x 164 ft)

1.  With HP 886 and 882 Latex Inks printed on the HP Latex R2000 Printer series. Interior in-window display ratings by HP Image Permanence Lab on a range of HP media. HP predictions based on test data under Xenon-Arc illuminant — calculation assumes 6,000 Lux/12 hr day. For more information, see HPLFMedia.com/hp/printpermanence.

2. Recommended on indoor smooth, non-porous, sealed flat and dry surfaces for up to 3 months. Slip resistance for dry environments based on testing by Sotter Engineering Corporation, June 2020, according to ANSI A137.1/A326.3 and AS HB198:2014 (AS/NZS 4586).

3. B1 approved fire certification.

4. See the HP REACH Declaration published at HP Printing Products and Consumable Supplies.

5. Interior in-window display ratings by HP Image Permanence Lab on a range of HP media. HP predictions based on test data under Xenon-Arc illuminant — calculation assumes 6,000 Lux/12 hr day. For more information, see HPLFMedia.com/hp/printpermanence.

6. Based on internal HP testing exposure at -40°C (-40°F)/53% RH for 24 hours does not appear to have any effect on the peel strength from the substrate.