Ink Compatibility | Compatible with Original HP Latex Inks; also solvent, low-solvent, and UV-curable inks |
Weight (with liner) | 320 g/m² per ISO 536 Test Method |
Thickness (with liner) | 304 microns/12 mil per ISO 20534 Test Method |
Liner | 140 g/m², double-sided PE-coated silicone paper |
Adhesive | Clear, removable, and repositionable adhesive |
Removability | Up to 3 years removable/repositionable indoors |
Opacity | >99% per TAPPI T-425 Test Method and ISO 2471 Test Method |
Brightness | >90 per TAPPI T-452 Test Method |
Whiteness | 120 per ASTM E313-98 Test Method |
Finish | Matte |
Slip Rating | In compliance according to ANSI A137.1/A326.3 and AS HB198:2014 (AS/NZS 4586) |
Operating Temperature | 15 to 25° C / 59 to 77° F |
Operating Humidity | 20 to 80% RH |
Water Resistance | Water-resistant |
Wind Orientation | Print side out |
Dry Time | Immediate |
Flame Resistance | B1, M1 and ASTM E8411 approved fire certifications |
Shelf Life | 1 year, unopened in original packaging |
Storage Temperature | 10 to 27° C / 50 to 80° F |
Storage Humidity | 35 to 65% RH |
Environmental | Adhesive fabric made with recycled water bottles and coating materials, REACH compliant |
Finishing/post processing | Use a carbide knife for kiss and die cutting |
Installation Tip | To install the graphic, peel 101 millimeters (4 inches) of the release liner off the graphic and place on wall or surface. Continue to peel back 101 millimeters (4 inches) of the liner incrementally while mounting. |
Country of Origin | Product of China |
Ordering Information | 4A4M5A 1372 mm x 30,5 m (54 in x 100 ft) 4A4M6A 1524 mm x 30,5 m (60 in x 100 ft) |
1. Product consists of PET fabric and coatings. With liner attached, 69% by weight of the product consists of recycled content. Base material fabric is made from 100% recycled resin.
2. 100% of total PET resin in the product made from recycled water bottles. The coating does not contain recycled materials. Compliant with Global Recycled Standard (GRS) Version 4.0.
3. According to “The Ecology of Recycling,” published on United Nations website, UN Chronicle, see un.org/en/chronicle/article/ecology-recycling and “Reducing and Reusing Basics,” US EPA, March 2022, see https://www.epa.gov/recycle/reducing-and-reusing-basics.
4. B1, M1 and ASTM E8411 approved fire certifications.
5. Slip resistance for dry environments based on testing by Sotter Engineering Corporation, September 2022, in compliance according to ANSI A137.1/A326.3 and AS HB198:2014 (AS/NZS 4586).
6. Recommended on indoor smooth, non-porous, sealed flat and dry surfaces for up 3 months. Slip resistance for dry environments based on testing by Sotter Engineering Corporation, September 2022, in compliance according to ANSI A137.1/A326.3 and AS HB198:2014 (AS/NZS 4586).
7. Performance varies based on printer and print profile. Water resistance testing by HP Image Permanence Lab on a range of HP media and follows ISO 18935 method. For more information, see HPLFMedia.com/hp/printpermanence.
8. See the HP REACH Declaration published at HP Printing Products and Consumable Supplies.