ModelFC9000-75FC9000-100FC9000-140FC9000-160
Max. cutting area
(W x L) (*1)
30 in x 164 ft
762 mm x 50 m
42 in x 164 ft
1067 mm x 50 m
54 in x 164 ft
1372 mm x 50 m
64 in x 164 ft
1626 mm x 50 m
Guaranteed Precision Cutting Area (*1)29.21 in x 50 ft41 in x 32 ft
35.2 in x 50 ft
53 in x 32 ft
35.2 in x 50 ft
63 in x 32 ft
35.2 in x 50 ft
Mountable media width(*2)

Min. 1.96 in
Max. 36.22 in

Min. 1.96 in
Max. 48.19 in

Min. 1.96 in
Max. 60.20 in

Min. 1.96 in
Max. 72.83 in

Max. cross cut width30 in42 in54 in64 in
Number of push rollers2 rollers3 rollers4 rollers4 rollers
CPU32-bit CPU
ConfigurationGrit rolling plotter
Drive methodDigital servo drive
Max. cutting speed58.5 inches per second (45 degree direction) 41.3 (axis direction)
Cutting forceMax. 600 gf in 48 steps
Axial accelerationMax. 39.2 m/s2 (4 G) in 8 steps
Compatible roll media diameterMin. 2.99 in Max 7.8 in. (Max diameter is 6.29 in when included flange is installed)
Mechanical resolution0.005 mm
Programmable resolutionGP-GL: 0.1 / 0.05 / 0.025 / 0.01 mm, HP-GL™: 0.025 mm
Distance accuracy (*2)Max. 0.1 mm or 0.1 % of plotted length
Repeatability (*2)Max. 0.1 mm in plot up to 2 m (excluding the expansion and contraction of the media)
Minimum character sizeApprox. 5 mm alphanumeric (varies depending on character font and media)
Mountable number of tools1 tool (cutting blade, plotting pen or pouncing tool) in standard;
2 tools (cutting blade and plotting pen) when second penholder (optional) is installed
Blade typesSupersteel (0.9 mm or 1.5 mm diameter)
Pen typesWater-based fiber-tip pen, Oil-based ballpoint pen
Pouncing tool typeSteel pin 1.2 mm diameter, required optional pouncing tool (PPA 33-TP12)
Media types (*3)Self-adhesive marking film (vinyl, fluorescent, reflective, high-intensity reflective film) up to 0.25 mm thick,Automotive protection and window tinting film, Sandblast resist rubber up to 1 mm thick
Compatible paper for pouncingRegular paper from 0.06 to 0.13 mm thick
Cross-cutterBuilt into the tool carriage
Perforation cuttingSupported (performed by force control)
InterfaceUSB 2.0(Full Speed), Ethernet 10BASE-T/100BASE-TX
Buffer memory2 MB
Command setsGP-GL / HP-GL™ emulation (Set by menu or command, and selects from GP-GL, HP-GL™, or Auto select)
Condition settingsDual configuration (save two (2) user settings with eight (8) separate condition settings per user)
DisplayGraphic type LCD (3.7-inch, backlight)
Power source100 V to 240 V AC, 50 / 60 Hz
Power consumptionAC100-240 V, 50/60 Hz
Operating environment50 to 95 ºF, 35 to 75 % R.H. (non-condensing)
Guaranteed accuracy environment60 to 89 ºF, 35 to 70 % R.H. (non-condensing)
External dimensions
(W x D x H)
50" x 28" x 48"
1270 x 711 x 1219 mm
61.8" x 28" x 48"
1570 x 715 x 1219 mm
73.6" x 28" x 48"
1870 x 711 x 1219 mm
84" x 28" x 48"
2133 x 711 x 1219 mm
Weight (*8)108 lbs.123 lbs.141 lbs.
178 lbs. /w take-up
154 lbs.
195 lbs. /w take-up
Included Software(*6))Graphtec Studio 2, Cutting Master 5 Plug-in for Windows and Mac
Compatible OS (*5)Windows 11 /10 / 8.1 / 64-bit editions & MacOS 10.2 (Sierra) to 13 (Ventura)
Warranty3 YEAR WARRANTY
SafetyPSE, UL/cUL, CE mark)
EMCVCCI Class A, FCC Class A, CE mark

*1: Operated with Graphtec specified cutting conditions and media.
*2: There are conditions for operation when setting the media.
*3: HP-GL is a registered trademark of Hewlett-Packard Company.
*4: CB15UA/CB15UA-K30 blades and reinforced backing sheets are recommended for certain grades of high- intensity reflective film.
*5: Graphtec does not support software / drivers used with operating systems that have become obsolete and are no longer supported by the OS developer.
*6: Software is available for download from Graphtec’s website.
*8: Includes stand and basket.