2 different table sizes are available.  The effective cutting area of the 50ES model is expanded for supporting 2 sheets of A3+ size, and the 60ES model supports 4 sheets of A3+ size, which is more suitable for post-processing of Print On Demand.

MODELFCX4000-50ESFCX4000-60ES (stand optional)
ConfigurationDigital servo system, Flatbed
Media hold-down methodElectrostatic panel
Effective cutting areaW 25.98" x H 19.21"W 38.4" x H 25.9"
Mountable media
(Y-axis direction)
21.10"27.97"
Maximum cutting speed29.5"/s (1 to 75 cm/s in 23 steps)
Cutting pressureTool 1: Max. 5.88 N (600 gf)
Tool 2: Max. 5.88 N (600 gf)
Cutting force settingsTool 1: in 48 steps, Tool 2: in 48 steps
Minimum character sizeApprox. 10 mm square (varies with character font and media)
Mechanical resolution0.005 mm (5µm)
Programmable resolutionGP-GL mode: 0.1/0.05/0.025/0.01 mm,
HP-GL™ (*1) : 0.025 mm
Distance accuracyMax.0.2% of the distance moved or 0.1mm, whichever is larger
(excluding contraction of media, in plotting/cutting mode) (*2)
PerpendicularityMax 0.3 mm / 16.93"
(excluding contraction of media, in plotting/cutting mode)
Max 0.4 mm / 24.01"
(excluding contraction of media, in plotting/cutting mode)
RepeatabilityMax 0.1mm (excluding contraction of media, in plotting/cutting mode)(*2)
Standard interfacesUSB2.0 (Full Speed) / RS-232C / Ethernet (10BASE-T/100BASE-TX)
Buffer memory2MB
Command setsGP-GL / HP-GL™ / AUTO (Automatic switching in GP-GL and HP-GL™)
Number of tools2 tools
Cutter blade, pen, and tool typesCutter blade: supersteel
Pen: water-based fiber-tip pen
Creasing/scoring tool
Operating panel3.7-inch graphical LCD (same LCD as the FCX2000)
New featuresDual configuration, Creasing in the curve, Perforation cutting (performed by the force control), Data management using the bar-code, Offline cutting operation using the USB memory, Display the degree of wear for the cutting blade, Confirming the cutting object size, Draft mode (higher throughput in arc)
Power supply100 to 240 V AC, 50/60 Hz (Auto switching)
Power consumptionMax. 120 VA
Operating environmentTemperature: 10 to 35 degree C ,
Humidity: 35 to 75% RH (non-condensing)
Guaranteed accuracy environmentTemperature: 16 to 32 degree C,
Humidity: 35% to 70% RH (non-condensing)
External dimensions (*3)
(W x D x H)
W 42.87" x D 35.31" x H 8.03"W 55.31" x D 42.08" x H 8.03"
(including stand : W 55.31" x D 43.18" x H 35.27")
Weightapprox. 63.93 lbs (29kg)approx. 83.77 lbs (38 kg)
(including stand 121.25 lbs (55 kg)
Compatible OS 6(*4)(*5)Windows 11 /10 / 8.1 / 64-bit editions & MacOS 10.2 (Sierra) to 10.13 (Ventura)
Included Software (*6)Graphtec Studio 2, Cutting Master 5 Plug-in for Windows and Mac
Compatible
Standards
SafetyUL/cUL, CE mark
EMCVCCI Class A, FCC Class A, CE mark (EN55032, others)

*1. HP-GL™ is registered trademark of the Hewlett-Packard Corporation of the United States.

*2. When operated with Graphtec specified media and conditions.

*3. Tolerance: +/- 5 mm

*4. Graphtec does not support software/driver used with operating systems that have become obsolete and are no longer supported by the OS developer.

*5. For more information about Windows and Macintosh compatibility, please check the website or contact with your local representative of Graphtec

*6. Software available for download on the Graphtec website.

Media TypeThicknessSupported BladesFCX4000-50/60ES
Self-adhesive marking film (vinyl, fluorescent, reflective)up to 0.25 mmCB09UB
Heavy paper/board (pattern paper, oil board)up to 0.5 mmCB15U、
CB15U-K30
up to 1.0 mmCB30UC-
Compressed foam sheetup to 0.8 mmCB15U-K30
Sandblast resist rubberup to 1.0 mmCB15U-K20
CardboardE fluteup to 1.5 mmCB30UC-
F / G fluteup to 1.2 mmCB30UC-
CB15U-K30
Rubber sheetup to 1~2 mmPM-CB-001-
Clear sheet for plastic boxesup to 0.5 mmCB15U
up to 1.0 mmCB15U-K30
High-intensity reflective filmup to 0.5 mmCB15UA
up to 1.0 mmCB15UA-K30