| Printing method | Drop-on-demand Micro Piezo Inkjet Technology |
|---|---|
| Print head height | Four-level adjustment: 1.5mm, 2.0mm, 2.5mm, 4.0mm |
| Print head | 2 (staggered set-up) |
| Max print resolution | 1200x1200dpi (1200/900/600/300 dpi print modes) |
| Media width | 600 cm 25″ |
| Media capacity | ø 5.9” dia / 2” & 3” cores / Roll media 66lbs or less |
| Max media thickness | Low 1 0.3mm, Low2 0.8mm, Mid. 1.3mm, High 2.8mm |
| Max printable width | 24.5 in |
| Max print speed | 11.8 sqm/hr – 127 sqf/hr |
| RIP software | CADlink™ Digital Factory 11 |
| Ink | Type | DTF Water Based |
|---|---|---|
| Ink Set | 4 COLOR (CMYK) | WHITE | |
| Volume | 500ml Direct to Film Ink Catridge XPD | |
| No. of slots | 6 |
| Interface | Gigabit-Ethernet (1000BASE-T ) |
|---|---|
| Power Requirements | AC 100-120V± 10%, 50/60Hz ± 1Hz |
| Printing Environment | Temperature: 68°F – 77°F/ 20-26° C Humidity: 40% – 55% |
| Power Consumption | Main: Operation status 700W or less | Standby: 30W or less |
| Dimensions (WxDxH) | Printer including stand: 70.68” X 35.23” X 56.48” cover closed |
| Weight | Body: 310lb | Stand: 70.54lb / Body: 140kg | Stand: 32kg |