Epson Enhanced Adhesive Synthetic Paper 44"x100' Roll
Epson Enhanced Adhesive Synthetic Paper 44"x100' Roll
Adhesive Synthetic Paper is an ideal choice for signage that requires adhesive backing. An affordable, polypropylene-base media, it's thin, light, and very flexible with a durable, wet-strength base. It delivers accurate colors and vivid results on its high-quality matte surface. An instant-drying paper, it's excellent for indoor banners and outdoor signage. When laminated, it's perfect for outdoor signage applications as well. Best of all, its adhesive backing makes it possible to remove and reposition signage for easy mounting.
*For ICC Profiles, select your printer model from Epson's Support Site and then select ICC Profiles from the Downloads section.
| Feature | Performance | Additional Comments |
| Indoor/outdoor usage | Recommended for both | UV lamination is recommended for outdoor usage. |
| Resistance to water | Good | Bleeding does not occur with incidental water contact. However, surface lamination is recommended in wet conditions to protect the outer coating. The base is waterproof. |
| Ink drying time | Immediate (less than 30 seconds) | Ink is dry to the touch after printing. However, it takes 24 hours before it cures and becomes durable. |
| Lamination feasibility | Pressure sensitive; cold lamination only. | A vinyl-based film that contains a UV absorbent is recommended for lamination purposes. For anti-graffiti purposes, use a fluoridebased film (i.e. Tedlar). For use in direct sunlight, avoid polyester or polycarbonate film. |
| Surface adhesion | Flat surfaces only | For best results, apply the adhesive to a clean, flat surface.Test it before applying it to the final print. Stretching the adhesive is not recommended, as the paper may shrink over time. |
| Adhesive backing | Re-positionable | Removable adhesive back provides enough strength and durability for outdoor usage. However, strength will decrease with increased re-positioning. |
