Search

GF 118 1.0 mil Polyester Mounting Film with Clear Double-Sided Adhesive 54" x 150' Roll

GF 118 1.0 mil Polyester Mounting Film with Clear Double-Sided Adhesive 54" x 150' Roll
Manufacturer: General Formulations
Availability: Call for Availability
SKU: 118-54
$455.55
decrease increase

GF 118 1.0 mil Polyester Mounting Film with Clear Double-Sided Adhesive 54" x 150' Roll

 

GF 118 is a double-coated pressure sensitive 1.0 mil clear polyester film with a permanent adhesive on one side and a removable adhesive on the other side. GF 118 has a two-liner construction. One side has a 1.2 mil clear polyester liner printed with “Remove to Expose Adhesive” to identify the removable adhesive and allows the graphics to be viewed after lamination. The other side has a 1.5 mil clear polyester liner for added clarity and wet out (permanent adhesive side). This product is designed for laminating thin flexible plastic films and papers commonly found in graphics for temporary application to glass. GF 118 clear mounting film can be laminated by a cold laminating process without the addition of heat.

 

Applications:

  • General Signage
  • POP & Indoor Signage
  • Windows

 

Ink Compatibility:

Not Applicable

 

Frequently Asked Questions:

How do I know which side to apply to the printed graphic?
The side that is opposite the printed liner side is the permanent adhesve side.


How do I know which side to apply to the printed graphic?
When you are finished applying the 118 film, you will have a graphic that will have the words “REMOVE TO EXPOSE ADHESIVE” on the face of the printed graphic. This is the side that is applied to the glass surface.

 

Is this product clear?
GF 118 has good clarity, but is not considered “optically clear”.

 

Film TypeClear Polyester Carrier
Film Thickness (mils)1.0
AdhesiveEmulsion Acrylic
Release Liner

Remov. Side: Clear Printed PolyesterPerm. 

Side: Clear Polyester

Outdoor DurabilityUp to 6 months

GF 118 1.0 mil Polyester Mounting Film with Clear Double-Sided Adhesive 54" x 150' Roll

 

GF 118 is a double-coated pressure sensitive 1.0 mil clear polyester film with a permanent adhesive on one side and a removable adhesive on the other side. GF 118 has a two-liner construction. One side has a 1.2 mil clear polyester liner printed with “Remove to Expose Adhesive” to identify the removable adhesive and allows the graphics to be viewed after lamination. The other side has a 1.5 mil clear polyester liner for added clarity and wet out (permanent adhesive side). This product is designed for laminating thin flexible plastic films and papers commonly found in graphics for temporary application to glass. GF 118 clear mounting film can be laminated by a cold laminating process without the addition of heat.

 

Applications:

  • General Signage
  • POP & Indoor Signage
  • Windows

 

Ink Compatibility:

Not Applicable

 

Frequently Asked Questions:

How do I know which side to apply to the printed graphic?
The side that is opposite the printed liner side is the permanent adhesve side.


How do I know which side to apply to the printed graphic?
When you are finished applying the 118 film, you will have a graphic that will have the words “REMOVE TO EXPOSE ADHESIVE” on the face of the printed graphic. This is the side that is applied to the glass surface.

 

Is this product clear?
GF 118 has good clarity, but is not considered “optically clear”.

 

Film TypeClear Polyester Carrier
Film Thickness (mils)1.0
AdhesiveEmulsion Acrylic
Release Liner

Remov. Side: Clear Printed PolyesterPerm. 

Side: Clear Polyester

Outdoor DurabilityUp to 6 months
Filters
Sort
display