Search

Roland TY-300 30" Direct-to-Film (DTF) Commercial Printer with RDTFS800 Shaker/Oven Combo

Roland TY-300 30" Direct-to-Film (DTF) Commercial Printer with RDTFS800 Shaker/Oven Combo - Boost DTF output with 10.9m²/h speeds, efficient ink use, and sheet-cutting. Includes a tested shaker/oven with continuous roll support and fume control system.

Manufacturer: Roland
Availability: Call for Availability
SKU: TY300-RDTFS800-BUNDLE
$28,995.00
decrease increase

Roland TY-300 30" Direct-to-Film (DTF) Commercial Printer with RDTFS800 Shaker/Oven Combo

 

***This printer DOES NOT ship with ink cartridges or starter inks. A full set of ink cartridges must be purchased with the printer for it to be operational.***

 

Next-Generation Direct-To-Film Printing

 

Performance. Productivity. Profits.

 

Introducing the TY-300, the best-in-class direct-to-film printer for bringing your boldest ideas to life on custom apparel and textiles.

 

Unleash unparalleled DTF performance and productivity with the TY-300. This powerhouse direct-to-film printer delivers stunning graphics and bold designs for heat transfer onto a wide range of materials, including cotton, polyester, denim, nylon, rayon, and more. Transform custom apparel and textiles with technology that enables you to produce vibrant colors, razor-sharp text, and fine details with unprecedented cost effectiveness, speed, and efficiency.

 

Welcome to a new generation of DTF printing.

 

The TY-300 offers higher print quality than the competition – reproduces colors, detailed images, and even smaller text with amazing accuracy.

Prints at speeds up to four times faster than competitive models, allowing for optimum productivity.

Low running costs and reduced ink consumption during printing/cleaning make the TY-300 more cost-efficient than other commercial DTF printers.

Creates durable custom apparel and textiles with a “soft hand” feel, natural finish, and outstanding washability.

 

The TY-300 is part of Roland DG’s full DTF solution, with RIP software, DTF film and powder, and an optional shaker/heater unit for automated DTF transfer production.

 

What's Included?

  • TY-300 30" Direct-To-Film Commercial Printer
  • RDTFS800 Shaker/Oven Combo
  • Dedicated stand
  • Power cord
  • Media holders
  • Separating knife
  • Replacement blade
  • Cleaning liquid
  • Drain bottle
  • User’s Manual
  • Software (VersaWorks 7, Roland DG Connect), etc.

(Ink sold separately; required for printer setup.)

 

Vibrant Colors

Create bold, vivid prints for any type of fabric and apparel with Roland's exclusive DTF inks.


Ultra-Fine Detail

Print small letters, intricate designs, and photographs with precision.


Maximum Productivity

Stable, high-quality printing with fast performance and minimal downtime.


Perforated Sheet Cut

Save time by integrating perforations directly into your prints.


Lower Operating Costs

Produce more with less thanks to ultra-efficient operations and automatic maintenance.


Intuitive Design

Equipped with user-friendly RIP software, a color LCD touch panel, and convenient features.

 

Gain an Advantage with a Purpose-built DTF Print Solution

 

The TY-300 is a fast, reliable, high-quality DTF printing solution designed and tested to produce premium output while reducing business operating costs.

 

4X Faster*

Blinding fast speed comes standard for high­-production workflows requiring massive output capabilities. *4X faster than the competition when tested.

 

100% Full Solution

Part of Roland DG's full DTF solution, with RIP software, DTF film and powder, and an optional shaker/heater unit for automated DTF transfer production.

 

Save Thousands

Reduced ink waste and improved efficiency equates to noticeably lower running cost over the competition.

 

Powerful Performance. Maximum Productivity.

Produce spectacular results quicker and more efficiently than ever before. The TY-300 delivers stable CMYKW printing at 10.9m²/h in Production mode — 45% faster than other DTF printers on the market.

 

Plus, with superior ink efficiency, automated maintenance sequences, and innovative features like Perforated Sheet Cut, the TY-300 streamlines your workflow and reduces cost, delivering maximum productivity and value for your business.

 

 

Print with Precision. Down to the Smallest Details.

Bring any print to life with the TY-300’s advanced capabilities that enable you to print small text, intricate designs, photographs, and fine details with pinpoint precision.

 

Paired with the True Rich Color 3 setting, which ensures vivid colors, neutral grays, smooth gradations, and natural skin tones, and your prints are guaranteed to be stunning — down to the smallest details.

 

 

Uncompromising Safety and Compliance with Exclusive DTF Inks

Designed exclusively for DTF printing, Roland DG’s newly developed S-PG2 inks optimize printer performance and are Oeko-Tex® Eco Passport certified, ensuring your custom apparel and textiles meet the highest global safety standards.

 

Enjoy the peace of mind knowing that your inks are free from harmful substances and are fully compliant with all international standards, including Europe’s REACH regulations.

 

 

Effortless Maintenance for Smooth Operations

Designed with consistent and high-quality printing in mind, the TY-300 comes equipped with automated maintenance features that keep your operations running smoothly. The printhead is automatically cleaned based on your usage to prevent nozzle dropout, while the advanced white ink circulation system minimizes ink clogging, guaranteeing stable white printing at all times.

 

Manual cleaning has also been made easier with our new head nozzle refresher tool that effectively cleans the printhead surface. Plus, you can now replace key components, such as caps, wipers, wiper cleaners, and other items around the printhead, without needing service personnel, making upkeep simple and hassle-free.

 

 

Included VersaWorks 7 RIP Software

The latest edition of the world’s most popular RIP software comes included with the TY-300, to manage print output effortlessly right out of the box.

 

  • When output data is loaded, the image is automatically inverted to match the DTF process, eliminating output errors.
  • Five print queues, five hot folders and unlimited queue settings.
  • New Job Assistant function to layout and edit cut lines in VersaWorks 6 for dual machine print-then-cut workflows.
  • Advanced and easy cropping, tiling, nesting and other features.
  • Match color output between different printers and print modes from a single printer with Printer Color Match Settings that integrate profiling tools such as the i1 Pro3 and new VW-S1 color measuring tool.

 

 

Master Your Print Operations with the Included Roland DG Connect App

Seamlessly manage your entire print operation from a single app — even if your business has multiple users or locations that need visibility.

 

The user-friendly Roland DG Connect app provides you with a detailed understanding of your printers while keeping your devices running at optimum performance. Reduce downtime and improve efficiency with a machine monitoring assistant that works in complete harmony with your device.

 

 

Roland DG’s Industry-Leading Warranty and Support

The TY-300 also comes with Roland DG’s industry-best customer service and support as well as a One-Year Trouble-Free Warranty. Your success is our success, so you can rest assured we’ll be with you every step of the way to make sure you are fully satisfied with the performance of your Roland DG device.

👕🧢🎒
Athletic Set: Jersey, Shirt, Cap, Bag
(CMYK + White)
Retail Sell Price
Per Athletic Set$100.00
Athletic Sets Per Hour60
Cost Per Athletic Set
Blank Item$20.00
Ink$0.95
Material Cost (Film + Powder)$0.80 ($0.40/sqft)
Profit per Hour: $4,695.00

 

Automate Your Workflow with the Roland DG Approved DTF Shaker Oven

 

The TY-300 printer seamlessly integrates with leading DTF powder shaker/heater units. To make it easy, Roland tested and approved an optional bundle for an automated system that puts on-demand customization right at your fingertips.

 

RDTFS800 Shaker

 

The RDTFS800 Inline Powder Shaker and Dryer is a high-performance curing unit engineered specifically for use with the Roland TY-300 30" Direct-to-Film Printer. Designed for seamless integration, it delivers consistent, high-quality, production-level output. Roland DG provides optimized pairing settings for flawless performance across all print modes.

 

This unit includes a dedicated printer-to-shaker alignment attachment that minimizes skew, ensuring more precise and efficient production.

 

Key Features and Benefits

  • Unattended Roll-to-Roll Printing
    Dual catch trays enable long-run, roll-to-roll output for increased production efficiency with minimal operator intervention.
  • Easy Setup & Alignment
    Includes an alignment fixture for consistent print positioning—even during full-roll, unattended printing.
  • Built-In Fume Extraction System
    Designed to save space while maintaining compliance with user safety standards.
  • Optimized for Roland DG TY-300 DTF Printer
    Engineered specifically for seamless integration with the TY-300, ensuring optimal performance.
  • High-Speed Curing
    Matches TY-300 production print speeds of 10.9 to 22.9 m/hr with efficient powder application and curing.
  • Compact & Energy Efficient
    Space-saving design with low power consumption compared to many competing systems.
  • Enhanced Thermal Insulation
    Heats up faster, retains heat longer, consumes less power, and maintains consistent temperatures.
  • Reliable Performance
    Built with high-quality components for stable, consistent, and repeatable operation.
  • Dual Heating Arrays
    Heats both over and under the media for optimal powder curing and performance.
  • Large Pre-Heater Tray
    Improves powder adhesion and performance at higher print speeds.
  • Dual Vertical Powder Collection Trays
    Allows the machine to stay in production while powder is continuously recycled.
  • Advanced Filtration System
    Integrated HEPA and charcoal filters reduce smoke and fumes during the curing process.
  • User-Friendly Maintenance
    Easy access to consumables makes maintenance fast and hassle-free.
  • Global Readiness
    Supports a wide range of languages and meets international certification standards.

 

DTF Workflow Overview

 

Guided Entry
Printed film exits the TY-300 printer and enters the shaker unit via a pre-heater platen.

 

Powder Application
Inside the shaker, the film is dusted with adhesive powder in the powder bin.

 

Powder Reuse System
Excess powder is collected in dual trays and recycled to the top hopper for reuse, reducing waste.

 

Heat Cure
The powdered film travels through the heating section where the adhesive powder melts and adheres to the print.

 

Cooling & Take-Up
After curing, the film is cooled by an exit fan and automatically wound onto the media take-up reel—ready for heat pressing and final production.

 

Shipping/Delivery Requirements

 

PLEASE NOTE: You must be able to receive a freight shipment. In most cases, this printer can be delivered via a lift-gate. However, it is the buyer’s responsibility to determine whether their location can accommodate a lift-gate delivery prior to purchase. If a lift-gate is not available, the buyer must have a suitable forklift or reach truck with extended forks, along with a trained operator, available on-site at the time of delivery to safely unload the equipment. The buyer assumes full responsibility for all aspects of delivery and any associated costs, including but not limited to freight charges, additional delivery services such as re-routing or inside delivery, handling fees, equipment rentals, and return shipping if applicable.

 

Additionally, when installation is performed by a certified technician, the buyer must provide on-site assistance to help move and position the equipment. This process typically requires 3–4 able-bodied individuals to assist with lifting and properly mounting the printer to its stand. 

Roland TY-300 30" Direct-to-Film (DTF) Commercial Printer with RDTFS800 Shaker/Oven Combo

 

***This printer DOES NOT ship with ink cartridges or starter inks. A full set of ink cartridges must be purchased with the printer for it to be operational.***

 

Next-Generation Direct-To-Film Printing

 

Performance. Productivity. Profits.

 

Introducing the TY-300, the best-in-class direct-to-film printer for bringing your boldest ideas to life on custom apparel and textiles.

 

Unleash unparalleled DTF performance and productivity with the TY-300. This powerhouse direct-to-film printer delivers stunning graphics and bold designs for heat transfer onto a wide range of materials, including cotton, polyester, denim, nylon, rayon, and more. Transform custom apparel and textiles with technology that enables you to produce vibrant colors, razor-sharp text, and fine details with unprecedented cost effectiveness, speed, and efficiency.

 

Welcome to a new generation of DTF printing.

 

The TY-300 offers higher print quality than the competition – reproduces colors, detailed images, and even smaller text with amazing accuracy.

Prints at speeds up to four times faster than competitive models, allowing for optimum productivity.

Low running costs and reduced ink consumption during printing/cleaning make the TY-300 more cost-efficient than other commercial DTF printers.

Creates durable custom apparel and textiles with a “soft hand” feel, natural finish, and outstanding washability.

 

The TY-300 is part of Roland DG’s full DTF solution, with RIP software, DTF film and powder, and an optional shaker/heater unit for automated DTF transfer production.

 

What's Included?

  • TY-300 30" Direct-To-Film Commercial Printer
  • RDTFS800 Shaker/Oven Combo
  • Dedicated stand
  • Power cord
  • Media holders
  • Separating knife
  • Replacement blade
  • Cleaning liquid
  • Drain bottle
  • User’s Manual
  • Software (VersaWorks 7, Roland DG Connect), etc.

(Ink sold separately; required for printer setup.)

 

Vibrant Colors

Create bold, vivid prints for any type of fabric and apparel with Roland's exclusive DTF inks.


Ultra-Fine Detail

Print small letters, intricate designs, and photographs with precision.


Maximum Productivity

Stable, high-quality printing with fast performance and minimal downtime.


Perforated Sheet Cut

Save time by integrating perforations directly into your prints.


Lower Operating Costs

Produce more with less thanks to ultra-efficient operations and automatic maintenance.


Intuitive Design

Equipped with user-friendly RIP software, a color LCD touch panel, and convenient features.

 

Gain an Advantage with a Purpose-built DTF Print Solution

 

The TY-300 is a fast, reliable, high-quality DTF printing solution designed and tested to produce premium output while reducing business operating costs.

 

4X Faster*

Blinding fast speed comes standard for high­-production workflows requiring massive output capabilities. *4X faster than the competition when tested.

 

100% Full Solution

Part of Roland DG's full DTF solution, with RIP software, DTF film and powder, and an optional shaker/heater unit for automated DTF transfer production.

 

Save Thousands

Reduced ink waste and improved efficiency equates to noticeably lower running cost over the competition.

 

Powerful Performance. Maximum Productivity.

Produce spectacular results quicker and more efficiently than ever before. The TY-300 delivers stable CMYKW printing at 10.9m²/h in Production mode — 45% faster than other DTF printers on the market.

 

Plus, with superior ink efficiency, automated maintenance sequences, and innovative features like Perforated Sheet Cut, the TY-300 streamlines your workflow and reduces cost, delivering maximum productivity and value for your business.

 

 

Print with Precision. Down to the Smallest Details.

Bring any print to life with the TY-300’s advanced capabilities that enable you to print small text, intricate designs, photographs, and fine details with pinpoint precision.

 

Paired with the True Rich Color 3 setting, which ensures vivid colors, neutral grays, smooth gradations, and natural skin tones, and your prints are guaranteed to be stunning — down to the smallest details.

 

 

Uncompromising Safety and Compliance with Exclusive DTF Inks

Designed exclusively for DTF printing, Roland DG’s newly developed S-PG2 inks optimize printer performance and are Oeko-Tex® Eco Passport certified, ensuring your custom apparel and textiles meet the highest global safety standards.

 

Enjoy the peace of mind knowing that your inks are free from harmful substances and are fully compliant with all international standards, including Europe’s REACH regulations.

 

 

Effortless Maintenance for Smooth Operations

Designed with consistent and high-quality printing in mind, the TY-300 comes equipped with automated maintenance features that keep your operations running smoothly. The printhead is automatically cleaned based on your usage to prevent nozzle dropout, while the advanced white ink circulation system minimizes ink clogging, guaranteeing stable white printing at all times.

 

Manual cleaning has also been made easier with our new head nozzle refresher tool that effectively cleans the printhead surface. Plus, you can now replace key components, such as caps, wipers, wiper cleaners, and other items around the printhead, without needing service personnel, making upkeep simple and hassle-free.

 

 

Included VersaWorks 7 RIP Software

The latest edition of the world’s most popular RIP software comes included with the TY-300, to manage print output effortlessly right out of the box.

 

  • When output data is loaded, the image is automatically inverted to match the DTF process, eliminating output errors.
  • Five print queues, five hot folders and unlimited queue settings.
  • New Job Assistant function to layout and edit cut lines in VersaWorks 6 for dual machine print-then-cut workflows.
  • Advanced and easy cropping, tiling, nesting and other features.
  • Match color output between different printers and print modes from a single printer with Printer Color Match Settings that integrate profiling tools such as the i1 Pro3 and new VW-S1 color measuring tool.

 

 

Master Your Print Operations with the Included Roland DG Connect App

Seamlessly manage your entire print operation from a single app — even if your business has multiple users or locations that need visibility.

 

The user-friendly Roland DG Connect app provides you with a detailed understanding of your printers while keeping your devices running at optimum performance. Reduce downtime and improve efficiency with a machine monitoring assistant that works in complete harmony with your device.

 

 

Roland DG’s Industry-Leading Warranty and Support

The TY-300 also comes with Roland DG’s industry-best customer service and support as well as a One-Year Trouble-Free Warranty. Your success is our success, so you can rest assured we’ll be with you every step of the way to make sure you are fully satisfied with the performance of your Roland DG device.

👕🧢🎒
Athletic Set: Jersey, Shirt, Cap, Bag
(CMYK + White)
Retail Sell Price
Per Athletic Set$100.00
Athletic Sets Per Hour60
Cost Per Athletic Set
Blank Item$20.00
Ink$0.95
Material Cost (Film + Powder)$0.80 ($0.40/sqft)
Profit per Hour: $4,695.00

 

Automate Your Workflow with the Roland DG Approved DTF Shaker Oven

 

The TY-300 printer seamlessly integrates with leading DTF powder shaker/heater units. To make it easy, Roland tested and approved an optional bundle for an automated system that puts on-demand customization right at your fingertips.

 

RDTFS800 Shaker

 

The RDTFS800 Inline Powder Shaker and Dryer is a high-performance curing unit engineered specifically for use with the Roland TY-300 30" Direct-to-Film Printer. Designed for seamless integration, it delivers consistent, high-quality, production-level output. Roland DG provides optimized pairing settings for flawless performance across all print modes.

 

This unit includes a dedicated printer-to-shaker alignment attachment that minimizes skew, ensuring more precise and efficient production.

 

Key Features and Benefits

  • Unattended Roll-to-Roll Printing
    Dual catch trays enable long-run, roll-to-roll output for increased production efficiency with minimal operator intervention.
  • Easy Setup & Alignment
    Includes an alignment fixture for consistent print positioning—even during full-roll, unattended printing.
  • Built-In Fume Extraction System
    Designed to save space while maintaining compliance with user safety standards.
  • Optimized for Roland DG TY-300 DTF Printer
    Engineered specifically for seamless integration with the TY-300, ensuring optimal performance.
  • High-Speed Curing
    Matches TY-300 production print speeds of 10.9 to 22.9 m/hr with efficient powder application and curing.
  • Compact & Energy Efficient
    Space-saving design with low power consumption compared to many competing systems.
  • Enhanced Thermal Insulation
    Heats up faster, retains heat longer, consumes less power, and maintains consistent temperatures.
  • Reliable Performance
    Built with high-quality components for stable, consistent, and repeatable operation.
  • Dual Heating Arrays
    Heats both over and under the media for optimal powder curing and performance.
  • Large Pre-Heater Tray
    Improves powder adhesion and performance at higher print speeds.
  • Dual Vertical Powder Collection Trays
    Allows the machine to stay in production while powder is continuously recycled.
  • Advanced Filtration System
    Integrated HEPA and charcoal filters reduce smoke and fumes during the curing process.
  • User-Friendly Maintenance
    Easy access to consumables makes maintenance fast and hassle-free.
  • Global Readiness
    Supports a wide range of languages and meets international certification standards.

 

DTF Workflow Overview

 

Guided Entry
Printed film exits the TY-300 printer and enters the shaker unit via a pre-heater platen.

 

Powder Application
Inside the shaker, the film is dusted with adhesive powder in the powder bin.

 

Powder Reuse System
Excess powder is collected in dual trays and recycled to the top hopper for reuse, reducing waste.

 

Heat Cure
The powdered film travels through the heating section where the adhesive powder melts and adheres to the print.

 

Cooling & Take-Up
After curing, the film is cooled by an exit fan and automatically wound onto the media take-up reel—ready for heat pressing and final production.

 

Shipping/Delivery Requirements

 

PLEASE NOTE: You must be able to receive a freight shipment. In most cases, this printer can be delivered via a lift-gate. However, it is the buyer’s responsibility to determine whether their location can accommodate a lift-gate delivery prior to purchase. If a lift-gate is not available, the buyer must have a suitable forklift or reach truck with extended forks, along with a trained operator, available on-site at the time of delivery to safely unload the equipment. The buyer assumes full responsibility for all aspects of delivery and any associated costs, including but not limited to freight charges, additional delivery services such as re-routing or inside delivery, handling fees, equipment rentals, and return shipping if applicable.

 

Additionally, when installation is performed by a certified technician, the buyer must provide on-site assistance to help move and position the equipment. This process typically requires 3–4 able-bodied individuals to assist with lifting and properly mounting the printer to its stand. 

Filters
Sort
display