GF 790AE Print-N-Privacy™ 3.0 mil Polymeric Glass Etch Vinyl (Light) with Clear Solvent Permanent Adhesive 54"x150' Roll

GF 790AE Print-N-Privacy™ is a 3.0 mil decorative polymeric glass etch vinyl coated with a solvent based permanent acrylic pressure sensitive adhesive on a 90# air-egress (AE) liner. This film can either be applied printed or unprinted for an etched glass visual effect or for use as a privacy film. The 90# AE liner offers easy dry application properties for large format graphics. GF 790AE accepts a variety of solvent-based, eco-solvent, latex and UV curable inks common to wide format digital printing systems.

GF 790AE Print-N-Privacy™ - Product Snapshot                                             GF 790AE Print-N-Privacy™ Etched Air Egress Vinyl

Applications:

• POP & Indoor Signage
• Windows

Ink Compatibility:

• Solvent
• Eco-Solvent
• Latex
• UV Curable

Frequently Asked Questions:

Can I use GF 790AE for other applications?
This product is recommended for use where a high quality glass etch vinyl film is desired to simulate etched glass. This film can be used for commercial and residential applications to glass. Typical dry applications include glass doors and windows. Note: Film not designed for cut lettering or to be repositioned (permanent adhesive). Application or transfer tape is recommended for easier application. (NOTE: Air-Egress adhesives are DRY APPLY ONLY).

If I dont have a soft edged squeegee can I use a regular squeege?
We do not recommend this unless the graphics have application tape on them. GF 790AE has translucent qualities and is a clear calendared vinyl, and as such may show squeegee marks. Regular squeegees may have burrs or uneven edges which may make impressions in the vinyl. Sometimes you “may” be able to heat these impressions out (depending on their severity), but we do not recommend heating the film on a cold glass surface, as cracking may occur. It is best to use a softer edge.